,
,
Standard Version
▪ Nominal force 17 kN @ 6 bar (max. operating pressure)
▪ Rivet shaft up to Ø 12 mm (Steel 370 N/mm2)
▪ Spindle stroke 5 - 40 mm with 0.01mm scale and mechanical stroke limit
▪ Machine weight: approx. 215 kg
▪ Electro-pneumatic drive▪ power supply @x@V, @Hz
▪ Permanently lubricated spindle
▪ Pressure cup & tool holder Rp=@ mm for forming tool length Ls=@ mm
▪ BFR-RN-281, Column, incl. height adjustment and table
▪ Color: light grey RAL 7035
Inklusive
▪ HPP-010-281, Process Control HPP-25, connections X1, X2, X3, X20, X21
▪ Incl. SEI-100-281, Distance sensor, Type HPP-25
▪ Incl. SEI-200-281, Pressure sensors, Type HPP-25
▪ HPP-X4-01, Connection X4, incl. two-hand relays, for two-hand control and emergency-stop
▪ NSL-2HD-010, two-hand control via push button (w/out E-stop)
Or NSL-010, footswitch, depending on safety device
▪ SEI-OTH-281, Sensor upper spindle position (TDC)
▪ PNP-HPP-281, Pneumatic service unit and pneumatic control package for HPP
▪ NZ-201, Adjustable task light, 24 VDC, LED
▪ Manual grease press
▪ CE Declaration of Conformity
Rotary index table:
▪ Rotary index table with 4 (optionally 6 or 8) stations. Riveting positions marked on dial plate
▪ Safety enclosure and Safety gates with safety switches, interlocked with E-stop circuit
▪ Safety gates separate operator from active stations
▪ Load & Unload station in front - Station 1
▪ Mechanical button for setup and correction mode
▪ Standard accessories and user manual in the language of destination
Options
▪ Customer specific hole pattern. Price on request
▪ NSL-2HD-011, Emergency-Stop (push button) integrated in two-hand control enclosure, or inside separate enclosure in case of cycle actuation via foot switch
▪ HPP-X5-01, Connection X5 for PVM Modul (for control of PNP-PRV-020)
▪ PNP-PRV-020, Proportional-pressure control, integrated & ready for operation (requires HPP-X5-01)
▪ HPP-X6-01, Connection X6, external safety / Reset
▪ NHE-MYC-U-02, Workpiece detection device NHE-U
▪ NHE-MST-xxx, NHE probe arm and probe (@)
▪ HPP-DLL-S7L-x, HPP-25 - Siemens S7 Communication link (S7LINK). License code to be ordered for each HPP control
▪ HPP-DLL-PCT, PC Tool analysis software, incl. UDP Protocol (on USB Stick)
▪ NZ-039, Automatic spindle lubrication system with lubricant level monitor
▪ Automatic unloading (requires 6 station table) by air eject or push out, depending on work piece
▪ Cycle initiation via foot switch instead of two hand control. Requires additional guarding to maintain CE Conformity. Price on request.
▪ Application specific work piece support fixtures. Price on request.
Subject to change.
